Blog
Florida-specific metal roofing guidance for contractors and property owners - panel selection, code and product approvals, coastal durability, pricing, and how to quote a job faster with IMQ.
Programs & Company
$250 off your first standing seam or 5V order, a $100 turnkey credit with no limit, and 10% off materials on qualifying turnkey jobs - here is exactly how the numbers work and stack.
Read →Coatings & Durability
PVDF and SMP are both real coating systems, not marketing labels. Here is what actually differs, which ERS panels carry which finish, and the warranty terms that go with each.
Read →Panels & Profiles
5V crimp is Florida's classic exposed-fastener panel: fast and affordable outside the HVHZ. Here is what it is, where it fits, and where it flatly does not.
Read →Florida Code & Compliance
The HVHZ is Miami-Dade and Broward, both counties entirely. Cross that line and four of our panels come off the table, the slope floor rises, and the submittal becomes a defined form.
Read →Florida Code & Compliance
An FL number and a Miami-Dade NOA are not the same document and neither one is a rating for a panel. Here is what each covers, and exactly what a Florida building department wants to see.
Read →Installation & Delivery
Panels cut to the exact length of each run remove end laps, and hardwood crates keep the finish clean from the shop to the deck. Here is how that order actually reaches your Florida jobsite.
Read →Panels & Profiles
SnapLock snaps, NailStrip nails, mechanical lock gets seamed. The difference shows up in labor, equipment and, in Miami-Dade and Broward, in whether you can use the panel at all.
Read →Cost & Quoting
IMQ is the ERS Metals quoting platform for contractors. Enter panel, dimensions, material and location, and get a priced standing seam or 5V material list in minutes instead of days.
Read →Panels & Profiles
Six standing seam profiles, three attachment methods, two seam heights and one hard constraint called the HVHZ. Here is how a Florida contractor picks the right one.
Read →IMQ turns your takeoff into an accurate standing seam or 5V material list fast.
