Blog
Every ERS Metals article on homeowner guides - written for Florida contractors and property owners.
Homeowner Guides
If solar is even a maybe down the road, the roof you pick now decides how it gets mounted later. Standing seam's raised seam is built for clamp-on mounting with no penetration.
Read →Homeowner Guides
The loud tin roof is a real thing, but it is not the roof going on a Florida house. Here is what actually decides how loud a metal roof sounds in the rain.
Read →Homeowner Guides
The national figure for metal roofing is 40 to 80 years, and it was not written about Florida. Here is what UV, salt and storm cycles actually change, and why a warranty term is not a service life.
Read →Homeowner Guides
Shingles are genuinely cheaper on day one in Florida. The case for metal is a case about the years after day one, and it depends almost entirely on how long you keep the house.
Read →Homeowner Guides
Standing seam and 5V crimp are the two common Florida residential metal roofs. One of them is not approved for Miami-Dade or Broward, which settles the choice before anything else does.
Read →Homeowner Guides
ERS Metals does not offer financing. Here is how the financing conversation actually works, and why an accurate material quote is what makes it real.
Read →Homeowner Guides
Rinsing salt off your coastal Florida metal roof twice a year is not just good practice, it is a documented warranty condition on real manufacturer coatings.
Read →Homeowner Guides
Metal earns no metal-specific wind mitigation credit in Florida. The roof covering credit on form OIR-B1-1802 is pass/fail and runs on documentation, and the form changes on April 1, 2026.
Read →IMQ turns your takeoff into an accurate standing seam or 5V material list fast.
