Blog
Every ERS Metals article on florida code & compliance - written for Florida contractors and property owners.
Florida Code & Compliance
A design pressure belongs to one tested assembly, in psf, not to a panel and not to a wind speed. Here is how the number is earned and how to read it correctly.
Read →Florida Code & Compliance
Most Florida re-roofs need a tear off. The code does allow a standing seam recover in narrow circumstances, and the conditions attached to it decide the job.
Read →Florida Code & Compliance
The HVHZ is Miami-Dade and Broward, both counties entirely. Cross that line and four of our panels come off the table, the slope floor rises, and the submittal becomes a defined form.
Read →Florida Code & Compliance
An FL number and a Miami-Dade NOA are not the same document and neither one is a rating for a panel. Here is what each covers, and exactly what a Florida building department wants to see.
Read →IMQ turns your takeoff into an accurate standing seam or 5V material list fast.
