The ERS Metals Contractor Rewards Program is three numbers, not a points ladder you have to redeem for gift cards: $250 off your first standing seam or 5V crimp order, a $100 credit on every turnkey job with no limit, and 10% off materials on qualifying turnkey orders. Enroll once, and every qualifying order after that earns automatically. Here is exactly how each figure works, who qualifies, and how they stack.
The $250 first-order discount
New contractors save $250 on their first order of standing seam or 5V crimp with ERS Metals, applied to either materials or installation services. It is a one-time discount meant to get a Florida contractor's first job through the door at a lower cost, whether that first job is supply-only or a full turnkey quote. There is no minimum order size published for this discount and no separate application form beyond enrolling with our team - contact sales to set up your account, and the discount applies to the first order that follows. It is worth saying plainly why this matters more in Florida than it would somewhere without HVHZ enforcement: a first job in Miami-Dade or Broward already carries the cost of ordering to a stricter approval and, often, a more involved submittal package. $250 does not erase that, but it takes some of the edge off testing a new supplier on a job where the code requirements leave less room for error than a standard re-roof outside the zone.
The $100 turnkey credit, and it does not run out
A turnkey order combines ERS Metals materials with ERS Installations labor on the same job - panels fabricated to exact length, delivered crated, and installed by a vetted crew, all under one order. Every turnkey job earns a $100 credit, and there is no cap on how many times you can earn it. Run ten turnkey jobs in a year and you have ten $100 credits, not one. That structure rewards contractors who make ERS their standard supply-and-install partner rather than a one-off vendor for a single bid.
10% off materials on qualifying turnkey orders
Qualifying turnkey orders also carry a 10% discount on the materials portion of the invoice. The discount applies to the panels and trim, not the labor line, and it is separate from the $100 credit - a qualifying turnkey job can carry both on the same invoice. What makes an order qualifying comes down to bundling standing seam or 5V crimp supply with ERS Installations labor rather than ordering materials alone; confirm the specifics for your job with sales before you bid it, since scope varies job to job. On a mid-size residential re-roof, 10% off the materials line is not a rounding error - it is often the difference between a bid that is competitive against a shingle re-roof and one that is not, which is part of why the discount is tied to turnkey orders rather than handed out on every ticket.
How the three stack on one invoice
Say a contractor enrolls and their first order is turnkey: ERS Metals materials plus ERS Installations labor on the same invoice. That one job carries all three figures at once, because all three conditions are met at once. Every turnkey job after it keeps the $100 credit and the 10% materials discount and drops the $250, because the first-order piece fires exactly once. There is no order of operations that costs you one of the three, no annual reset that takes them back, and no points ledger to reconcile.
What the program does not do
Two honest limits, because a rewards page that lists only upside is a sales page.
The discounts do not change what you are allowed to install. Ten percent off materials does not make a non-HVHZ panel permittable in Miami-Dade or Broward, and we will not quote NS100, 5V crimp, rib panel or 26 gauge PBR into those two counties at any price. In the HVHZ the panel list narrows first, and the pricing conversation happens inside whatever is left.
And the 10% applies to the materials line, not to labor, freight or field measurement. What counts as a qualifying turnkey order varies with scope, so confirm it with sales before you build a bid around it rather than after the invoice lands.
Who qualifies
The program is open to Florida roofing contractors who enroll with ERS Metals. There is no cost to enroll and no minimum volume commitment published for the base program. What changes the numbers is whether you order materials only or go turnkey through ERS Installations - materials-only orders earn the first-order discount but not the turnkey credit or materials discount, since those two are tied to combining supply and installation on the same job. There is no requirement to route every job through ERS to stay enrolled; the program applies to whatever share of your work you place with us, whether that is every job on your schedule or an occasional one when the panel and finish fit.
A separate way to earn: the $500 referral program
The Contractor Rewards Program covers your own orders. A separate program, the Referral Program, pays $500 per successful referral with no limit, when a contractor you refer places their first order with ERS - materials, installation, field measurement, or any combination. The two programs run independently and stack with each other: you can earn your own rewards on your own jobs and referral payouts on top for bringing other contractors in.
Why a metal supplier's program looks different from a shingle manufacturer's
Most of what shows up when a Florida contractor searches for a roofing rewards program is built around asphalt shingles - certification tiers with names like Master Elite or Platinum Preferred, point systems tied to purchase volume across a calendar year, and perks that skew toward marketing co-op dollars and lead-sharing rather than cash off an invoice. Those programs make sense for a manufacturer selling through a network of distributors, where the contractor's relationship with the actual product is one step removed. ERS Metals sells directly, so the program does not need a tier structure to sort volume buyers from occasional ones - it is three flat figures that apply the same way whether this is your first order or your fiftieth. There is no annual point reset, no minimum spend to stay at a given tier, and no certification exam to sit for. That is a deliberate tradeoff: a simpler program in exchange for fewer bells and whistles than a national manufacturer's marketing budget can fund.
Getting started
If you already order standing seam or 5V for Florida jobs, enrolling costs you nothing and the first-order discount applies to whatever you order next. Enrollment itself is a short process rather than an application review: tell us who you are, confirm you are a Florida roofing contractor, and set up an account tied to Instant Metal Quote so the discount attaches automatically at your first order. There is no waiting period between enrolling and placing that first discounted order, and there is no separate rewards portal to log into. The figures land on the invoice for the order they cover. Contact ERS sales to enroll, or start pricing a job now with Instant Metal Quote and mention the rewards program when you place the order. For background on the standing seam profiles these discounts apply to, see our standing seam guide for Florida contractors.
