Service Area
Standing seam and 5V for Palm Coast homes and businesses across Flagler County. Standing seam, 5V, rib and PBR panels, custom trim, field measurement, and crated delivery - quoted fast with IMQ.
Flagler County
A lot of Palm Coast backs onto saltwater canals rather than the ocean, so we ask where the house actually sits before recommending a substrate.
1" Snaplock Standing Seam, 1.5" Snaplock Standing Seam, 1" Nailstrip Standing Seam, 1.5" Nailstrip Standing Seam, 1" Mechanical Lock Standing Seam, and 1.5" Mechanical Lock Standing Seam panels in aluminum or Galvalume, with 70% PVDF finishes and no exposed fasteners.
See panels →The traditional Florida exposed-fastener panel, with a resting leg for thermal movement. Approved for use outside the HVHZ.
See 5V →We verify the roof onsite before fabrication, so exact-length panels and trim fit the first time.
Field measurement →Local knowledge
Palm Coast is Flagler County's population center and one of the fastest-growing cities in Florida - a very large stock of similar homes built inside a compressed window, which means re-roof demand arrives in waves rather than a trickle. That predictability is useful, because we can hold color and profile inventory against it.
The city is laid out on saltwater canals running back from the Intracoastal, so a substantial share of Palm Coast homes sit on brackish water even when they are nowhere near the ocean. That is enough salt to matter for fastener and finish selection, and it is why we ask where a house actually sits before quoting a substrate.
Flagler County took direct damage from Matthew in 2016 and again from Ian and Nicole in 2022, and the beachside dune line has never fully recovered. Homeowners here have watched shingle roofs fail three times in a decade, which is most of why the metal conversion rate in Palm Coast runs ahead of the state.
Approvals
Flagler County is outside the High Velocity Hurricane Zone - the HVHZ is Miami-Dade and Broward only - so every profile in our catalog can be permitted in Palm Coast.
SL100, SL150, NS150, M100 and M150 carry HVHZ and Miami-Dade approval, which is a higher bar than Flagler County requires, so those specs clear plan review with room to spare.
NS100, 5V, RIB and PBR are approved for use outside the HVHZ, which covers Flagler County and every other Florida county except Miami-Dade and Broward. They are fully permittable here.
Approval numbers are published on each panel's page and the documentation travels with the order, so the submittal is complete when the crew mobilizes. See the Florida approvals library for the current documents.
Getting it there
Palm Coast is inside our Northeast Florida delivery radius, a short run from the Jacksonville yard. Orders move on our schedule, which is what makes late trim changes survivable on a custom build.
Panels, trim and accessories are fabricated to exact length so there are no end-laps to seal in the field, and they ship crated together rather than as separate deliveries. Add turnkey installation through ERS Installations for a fully managed metal roof in Flagler County.
FAQ
All of them. Flagler County is outside the High Velocity Hurricane Zone, so every profile we stock is permittable in Palm Coast - including the profiles that are approved for use outside the HVHZ only. Florida Product Approval documentation travels with the order for the submittal.
Nearby
Working across the region? These are the neighboring markets we supply on the same terms.
Quote a Palm Coast project in minutes - materials, trim and the delivery leg.
