A metal roof is a decades-long decision, and in Florida the contractor you hire matters as much as the panel you choose. Before you sign anything, check four things in order: the license type, the insurance certificate, the product approval paperwork for the exact panel going on your house, and the warranty terms in writing. Skip any one of them and you are trusting a stranger's word on a job that costs a great deal of money and has to survive a hurricane.

We supply metal roofing to contractors across Florida rather than selling installation directly to homeowners, so we do not have a stake in which specific company you hire. That is exactly why we can write this plainly.

Check the license, and understand certified versus registered

Florida licenses roofing contractors through the Department of Business and Professional Regulation, under the Construction Industry Licensing Board. Florida Statute 489.105 draws a distinction most homeowners have never heard, and it is worth knowing. A certified contractor holds a certificate of competency issued by the state and, in the statute's own words, shall be allowed to contract in any jurisdiction in the state. A registered contractor has met a specific local jurisdiction's competency requirements and may contract only in such jurisdictions.

In practice, a certified contractor can legally pull a permit and do your job anywhere in Florida. A registered contractor can only do it in the county or city where they registered. If a crew from several counties away shows up to reroof your house and only holds a registration tied to somewhere else, that is worth asking about before you sign, not after the crew is on your roof. You can look up any contractor's license directly through the DBPR's public license search. Confirm the license is active, confirm the name on the license matches the company in front of you, and ask directly whether it is certified or registered.

Ask for the insurance certificate, not the promise of one

Every legitimate roofing contractor in Florida carries general liability insurance, and workers' compensation coverage if they have employees. "We're insured" is a sentence, not a certificate. Ask the contractor to have their insurance agent send you a certificate of insurance directly, naming you or your property as certificate holder. That single request filters out a real share of the operators who should not be on your roof, because it takes an actual policy in force to produce one.

Ask for the product approval documentation for the exact panel

This is the step most homeowners skip entirely, and it is the one place a metal roofing supplier can genuinely help rather than just sell. Every metal roof panel installed in Florida is supposed to carry a Florida Product Approval, an FL number issued under Florida Statute 553.842, or a Miami-Dade Notice of Acceptance. Ask your contractor for the approval document for the specific profile, gauge and finish going on your roof, not a general brochure for "our metal roofing."

A real approval document, read in full, tells you:

  • The Florida Building Code edition it was evaluated against. One evaluated under a superseded edition is a red flag.
  • Whether it is approved for use in the High Velocity Hurricane Zone, outside it, or both.
  • The exact tested assembly: substrate and alloy, coating, panel width, seam type and minimum slope.
  • The deck type the approval assumes, since the deck itself is a separate design question the approval does not resolve.
  • The design wind load appendix for the specific attachment pattern being installed.
  • Whether it is signed and sealed by a Florida-licensed professional engineer, and which quality assurance agency stands behind it.

If a contractor cannot produce this document, or produces one for a different panel than the one being quoted, stop and ask why. We put together a full walkthrough of how this paperwork works and how to read it in our Florida product approval and installation instructions resource, and in how Florida product approval and Miami-Dade NOA actually work.

Confirm the permit is pulled, in the contractor's name

A roofing job in Florida requires a permit, and the contractor pulling it under their own license number is what makes them, not you, accountable to the building official and to the inspection process. If a contractor asks you to pull the permit yourself, or offers to skip it to save time, that is not a shortcut worth taking. It removes the inspection step that exists to catch a bad deck, a wrong attachment schedule, or an unapproved product before any of it gets covered up.

Watch for out-of-area crews after a storm

The certified-versus-registered distinction matters most right after a hurricane, when crews from outside your area show up door to door offering to reroof houses immediately. Some are legitimate certified contractors working statewide, which the law allows. Others are operating outside the jurisdiction their registration actually covers, and a registered contractor who only qualified in one county has no legal standing to pull your permit somewhere else. Ask where the company is based, ask to see the license before any tarp goes up, and do not let storm urgency substitute for the check you would run in a calm week.

Never let anyone offer to touch your insurance deductible

This one is not a judgment call, it is the law. Florida Statute 489.147 makes it illegal for a contractor to offer a rebate, gift, gift card, cash, coupon, or a waiver of any insurance deductible in exchange for allowing a roof inspection or filing an insurance claim. If you hear a version of "we'll cover your deductible" or "free roof, insurance pays for it," you are being solicited illegally, not offered a deal.

The statute reaches further than most homeowners realize, and four of its provisions are worth knowing by number.

  • 489.147(1)(a). A door hanger, flyer, business card, magnet or email urging you to make a roof claim has to state, in at least 12 point type and at least half the size of the largest font used, that you are responsible for your deductible and that deductible-waiving and false claims are third degree felonies. A flyer without that block is itself a prohibited advertisement.
  • 489.147(2)(d). A contractor may not interpret your policy or advise you on your coverage or your duties under it unless they hold a public adjuster license under chapter 626. Plenty of them do it anyway.
  • 489.147(2)(e). A contractor may not hand you an agreement authorizing repairs without a good faith itemized and detailed estimate of services and materials. If the actual cost later differs because the insurer adjusted the claim, that is not a violation.
  • 489.147(5). A roof repair or replacement contract has to contain a notice that the contractor may not engage in the practices in paragraph (2)(b). If that notice is missing, you may void the contract within 10 days of executing it.

Be careful with the cancellation right, because it is narrower than it is usually described. Subsection (6)(a) gives you 10 days to cancel a roof contract without penalty or obligation, but only where the contract was entered into within 180 days of the events behind a Governor's declared state of emergency and your property sits inside the declared area, and the window closes at 10 days or at the official start date, whichever comes first. Outside that, there is no general 10-day cooling-off period on a Florida roofing contract. The one in subsection (5) is different again and depends on the contractor having left the required notice out.

It carries real teeth in both directions. A licensed contractor faces disciplinary proceedings under s. 489.129 and a fine of up to $10,000 for each violation, and an unlicensed person doing the same thing is guilty of unlicensed contracting and may also be fined up to $10,000 per violation.

Get the warranty terms in writing, as separate documents

A metal roof carries more than one warranty, and they are not the same document. There is a material and finish warranty from the coil producer, and there is a workmanship warranty from whoever installed it. A verbal "lifetime warranty" is not a warranty. Ask for both documents before you sign, read what each one actually covers, and read what voids it. We lay out our own workmanship terms and how they relate to manufacturer material terms on our warranties page, because a warranty you have not read is not one you can rely on later.

Where ERS fits, if you want it to

ERS Metals supplies the panels; we do not install roofs directly for homeowners. If you would rather have the whole job, from measurement through installation, handled by one accountable company, ERS Installations is our in-house install arm and carries its own written workmanship warranty. You are not required to use them. The vetting steps above apply to any contractor you hire, including us, and that is the point of writing them down.

A short list, before you sign anything

  • License verified as active on the DBPR search, and confirmed certified or registered.
  • Certificate of insurance sent to you directly by the agent, not just described verbally.
  • Product approval document in hand for the exact panel, gauge and finish being quoted.
  • Permit to be pulled by the contractor, under their own license number.
  • No mention, anywhere in the pitch, of covering or waiving your deductible.
  • A good faith itemized estimate of services and materials, and the 489.147(5) notice actually printed in the contract.
  • Material warranty and workmanship warranty each in writing, as separate documents.

None of these checks require special expertise. They require asking for a document instead of accepting a sentence, and walking away from anyone who cannot or will not produce one.

If you already know the panel you want and are ready to see it specified for your address, a contractor can price it through Instant Metal Quote, or you can contact us with questions before you sign anything.