Service Area
Durable coastal panels for a county that has taken two direct landfalls in twenty years. Standing seam, 5V, rib and PBR panels, custom trim, field measurement, and crated delivery - quoted fast with IMQ.
Charlotte County
For a long-tenure owner here the comparison is not metal against one shingle roof, it is metal against two shingle roofs and two deductibles.
1" Snaplock Standing Seam, 1.5" Snaplock Standing Seam, 1" Nailstrip Standing Seam, 1.5" Nailstrip Standing Seam, 1" Mechanical Lock Standing Seam, and 1.5" Mechanical Lock Standing Seam panels in aluminum or Galvalume, with 70% PVDF finishes and no exposed fasteners.
See panels →The traditional Florida exposed-fastener panel, with a resting leg for thermal movement. Approved for use outside the HVHZ.
See 5V →Ridge, hip, valley, eave and rake fabricated to your details and crated alongside the panels.
Trim & accessories →Local knowledge
Charlotte County has been hit twice in twenty years by direct landfall: Charley in 2004 at Punta Gorda and Ian in 2022 just up the coast. Very few Florida counties carry that record, and it shows in how owners here think about roofing. The question is not whether a storm comes, it is what is still on the house afterward.
The population skews retirement-age and long-tenure, which changes the conversation. An owner planning to stay twenty-five years is not comparing a metal roof to a shingle roof, they are comparing it to two shingle roofs plus two deductibles, and that comparison usually lands on metal.
Port Charlotte and Punta Gorda sit on the Peace River and Charlotte Harbor, so most of the county is on brackish or salt water. Aluminum with a PVDF finish is the durable specification here. Galvalume is defensible on the genuinely inland eastern county, but not much closer in than that.
Approvals
Charlotte County is outside the High Velocity Hurricane Zone - the HVHZ is Miami-Dade and Broward only - so every profile in our catalog can be permitted in Port Charlotte.
SL100, SL150, NS150, M100 and M150 carry HVHZ and Miami-Dade approval, which is a higher bar than Charlotte County requires, so those specs clear plan review with room to spare.
NS100, 5V, RIB and PBR are approved for use outside the HVHZ, which covers Charlotte County and every other Florida county except Miami-Dade and Broward. They are fully permittable here.
Approval numbers are published on each panel's page and the documentation travels with the order, so the submittal is complete when the crew mobilizes. See the Florida approvals library for the current documents.
Getting it there
Port Charlotte is served by crated statewide freight out of Northeast Florida. It is a long leg and we will not pretend otherwise: we quote a delivery date with the order and crate the panels so they arrive straight, dry and ready to set.
Panels, trim and accessories are fabricated to exact length so there are no end-laps to seal in the field, and they ship crated together rather than as separate deliveries. Add turnkey installation through ERS Installations for a fully managed metal roof in Charlotte County.
FAQ
Usually, yes. Over a twenty-five year hold the comparison is not one metal roof against one shingle roof, it is one metal roof against two shingle replacements and two deductibles - in a county that has taken two direct hurricane landfalls in twenty years.
Nearby
Working across the region? These are the neighboring markets we supply on the same terms.
Quote a Port Charlotte project in minutes - materials, trim and the delivery leg.
