5V crimp
The traditional Florida exposed-fastener panel, with a resting leg for thermal movement. Approved for use outside the HVHZ.
See 5V →Service Area
Bradenton metal roofing supply
Island 5V west of I-75, agricultural structural panel east of it. Standing seam, 5V, rib and PBR panels, custom trim, field measurement, and crated delivery - quoted fast with IMQ.
Manatee County
What we supply in Bradenton
Manatee splits cleanly at the interstate: coastal aluminum on one side, cost-per-square-foot agricultural work on the other.
PBR / R-panel
The structural commercial panel: it spans open purlins with no deck underneath, and the 24 ga is HVHZ and Miami-Dade approved.
See PBR →Rib panel
Wide coverage, exposed fasteners, no clips - the most affordable route to a real metal roof. Approved outside the HVHZ.
See rib panel →Local knowledge
Metal roofing in Bradenton
Manatee County splits cleanly at the interstate. West of I-75 is coastal - Bradenton, Palmetto, Cortez and the Anna Maria Island barrier strip, all with Gulf and bay salt exposure. East of it is still working agricultural land, with packing houses, equipment barns and greenhouse operations.
Anna Maria Island is old, low and almost entirely small-scale: cottages and short commercial buildings on a narrow key. 5V crimp is the traditional profile there and it still fits, provided the substrate is aluminum. A steel panel that close to the Gulf is a shorter-lived roof no matter what the finish is.
East Manatee is a structural panel market. Agricultural buildings span open framing and get judged almost entirely on cost per covered square foot, which is exactly the case PBR and rib panel are built for. Both ship on the same crated delivery as anything else in the order.
Approvals
Permitting in Manatee County
Manatee County is outside the High Velocity Hurricane Zone - the HVHZ is Miami-Dade and Broward only - so every profile in our catalog can be permitted in Bradenton.
SL100, SL150, NS150, M100 and M150 carry HVHZ and Miami-Dade approval, which is a higher bar than Manatee County requires, so those specs clear plan review with room to spare.
NS100, 5V, RIB and PBR are approved for use outside the HVHZ, which covers Manatee County and every other Florida county except Miami-Dade and Broward. They are fully permittable here.
Approval numbers are published on each panel's page and the documentation travels with the order, so the submittal is complete when the crew mobilizes. See the Florida approvals library for the current documents.
Getting it there
Delivered to your Bradenton jobsite
Bradenton is served by crated statewide freight out of Northeast Florida. It is a long leg and we will not pretend otherwise: we quote a delivery date with the order and crate the panels so they arrive straight, dry and ready to set.
Panels, trim and accessories are fabricated to exact length so there are no end-laps to seal in the field, and they ship crated together rather than as separate deliveries. Add turnkey installation through ERS Installations for a fully managed metal roof in Manatee County.
FAQ
Bradenton metal roofing questions
Do you supply agricultural buildings in east Manatee County?
Yes. PBR spans open purlins with no deck underneath, which is what makes it economical on barns, packing houses and equipment buildings, and rib panel covers the smaller structures. Both are fabricated to exact length and crated on the same delivery as any residential material in the order.
Nearby
Other markets we serve in Tampa Bay and the central Gulf coast
Working across the region? These are the neighboring markets we supply on the same terms.
Price your next metal roof in minutes
Quote a Bradenton project in minutes - materials, trim and the delivery leg.