PBR / R-panel
The structural commercial panel: it spans open purlins with no deck underneath, and the 24 ga is HVHZ and Miami-Dade approved.
See PBR →Service Area
Melbourne metal roofing supply
Structural panel for the aerospace corridor, aluminum for the barrier island. Standing seam, 5V, rib and PBR panels, custom trim, field measurement, and crated delivery - quoted fast with IMQ.
Brevard County and the Space Coast
What we supply in Melbourne
Salt from the Atlantic on one side and the Indian River Lagoon on the other means anything east of the causeways gets an aluminum specification.
Standing seam
1" Snaplock Standing Seam, 1.5" Snaplock Standing Seam, 1" Nailstrip Standing Seam, 1.5" Nailstrip Standing Seam, 1" Mechanical Lock Standing Seam, and 1.5" Mechanical Lock Standing Seam panels in aluminum or Galvalume, with 70% PVDF finishes and no exposed fasteners.
See panels →Field measurement
We verify the roof onsite before fabrication, so exact-length panels and trim fit the first time.
Field measurement →Local knowledge
Metal roofing in Melbourne
Brevard County is the Space Coast, and its industrial base is aerospace: Cape Canaveral, Kennedy Space Center, and a dense band of contractor and manufacturing facilities running from Titusville down through Palm Bay. Those are large, low-slope, structural roofs, and PBR over open framing is the standard specification.
The residential side is barrier island and lagoon front. Melbourne Beach, Indialantic, Satellite Beach and Cocoa Beach all sit between the Atlantic and the Indian River Lagoon, which is salt from both directions. Aluminum with a PVDF finish is what we recommend on anything east of the causeways.
Brevard is also one of the higher-exposure stretches of the Florida Atlantic coast for design wind, and the county building department is used to reviewing uplift calculations in detail. We supply the Florida Product Approval documentation with the order so the submittal package is complete the first time.
Approvals
Permitting in Brevard County
Brevard County is outside the High Velocity Hurricane Zone - the HVHZ is Miami-Dade and Broward only - so every profile in our catalog can be permitted in Melbourne.
SL100, SL150, NS150, M100 and M150 carry HVHZ and Miami-Dade approval, which is a higher bar than Brevard County requires, so those specs clear plan review with room to spare.
NS100, 5V, RIB and PBR are approved for use outside the HVHZ, which covers Brevard County and every other Florida county except Miami-Dade and Broward. They are fully permittable here.
Approval numbers are published on each panel's page and the documentation travels with the order, so the submittal is complete when the crew mobilizes. See the Florida approvals library for the current documents.
Getting it there
Delivered to your Melbourne jobsite
Melbourne is served by crated statewide freight out of Northeast Florida. It is a long leg and we will not pretend otherwise: we quote a delivery date with the order and crate the panels so they arrive straight, dry and ready to set.
Panels, trim and accessories are fabricated to exact length so there are no end-laps to seal in the field, and they ship crated together rather than as separate deliveries. Add turnkey installation through ERS Installations for a fully managed metal roof in Brevard County and the Space Coast.
FAQ
Melbourne metal roofing questions
Do you supply the Florida approval documents for a Brevard County permit?
Yes. Every profile we ship is Florida Product Approved and the approval documentation goes out with the order, so the submittal is complete when the crew mobilizes. The approval numbers are also published on each panel's product page.
Nearby
Other markets we serve in Central Florida
Working across the region? These are the neighboring markets we supply on the same terms.
Price your next metal roof in minutes
Quote a Melbourne project in minutes - materials, trim and the delivery leg.