Service Area
Metal roofing supply and contractor support for Gainesville and Alachua County. Standing seam, 5V, rib and PBR panels, custom trim, field measurement, and crated delivery - quoted fast with IMQ.
Alachua County
Inland North Central Florida is a heat problem, not a salt problem - which changes what we push hardest, and it is usually the underlayment.
1" Snaplock Standing Seam, 1.5" Snaplock Standing Seam, 1" Nailstrip Standing Seam, 1.5" Nailstrip Standing Seam, 1" Mechanical Lock Standing Seam, and 1.5" Mechanical Lock Standing Seam panels in aluminum or Galvalume, with 70% PVDF finishes and no exposed fasteners.
See panels →Wide coverage, exposed fasteners, no clips - the most affordable route to a real metal roof. Approved outside the HVHZ.
See rib panel →Self-adhered peel-and-stick membrane built for the roof-deck temperatures under a Florida metal panel.
See underlayment →Local knowledge
Gainesville is Alachua County and the University of Florida, which shapes the roofing market more than the climate does. A large share of the housing stock is rental and investor-owned, so the calculation is life-cycle cost over a twenty-year hold rather than curb appeal, and metal wins that arithmetic against a third shingle replacement.
North Central Florida is inland, so salt is not the problem here. Heat is. Roof decks in Alachua County sit in full sun through a long summer, and what fails first is usually the underlayment rather than the panel. We pair panels with a high-temperature self-adhered membrane for that reason instead of treating underlayment as the line item to value-engineer.
Alachua County is also genuinely rural outside the city, through Newberry, Alachua, Micanopy and High Springs, with a great deal of agricultural building. Rib panel and structural panel cover barns, equipment sheds and pole buildings at a cost per square that no other compliant roof matches, and they ship on the same truck as the residential order.
Approvals
Alachua County is outside the High Velocity Hurricane Zone - the HVHZ is Miami-Dade and Broward only - so every profile in our catalog can be permitted in Gainesville.
SL100, SL150, NS150, M100 and M150 carry HVHZ and Miami-Dade approval, which is a higher bar than Alachua County requires, so those specs clear plan review with room to spare.
NS100, 5V, RIB and PBR are approved for use outside the HVHZ, which covers Alachua County and every other Florida county except Miami-Dade and Broward. They are fully permittable here.
Approval numbers are published on each panel's page and the documentation travels with the order, so the submittal is complete when the crew mobilizes. See the Florida approvals library for the current documents.
Getting it there
Gainesville is a straightforward day run from Northeast Florida. Panels are fabricated to exact length, crated with the trim and accessories, and delivered together rather than in pieces.
Panels, trim and accessories are fabricated to exact length so there are no end-laps to seal in the field, and they ship crated together rather than as separate deliveries. Add turnkey installation through ERS Installations for a fully managed metal roof in Alachua County.
FAQ
Yes. Even away from the coast, Alachua County roofs face heavy UV, long summer heat and hurricane-force gusts from storms crossing the peninsula. Florida-approved standing seam and rib panels shed water fast, resist wind uplift, and comfortably outlast shingles in that climate.
Nearby
Working across the region? These are the neighboring markets we supply on the same terms.
Quote a Gainesville project in minutes - materials, trim and the delivery leg.
